Kramer's KDS-8 zero latency 4K HDR SDVoE (Video over Ethernet) streaming transceiver supports video up to 4K@60Hz (4:4:4) for operation over standard copper Ethernet cable. The KDS-8 encodes HDMI signal input for streaming over a local network and features an analog audio port allowing you to embed audio into the stream. It can also be used as a decoder to output the signal to a connected display via standard HDMI cabling. The KDS-8 also passes bi-directional InfraRed Remote and RS232 control data along with the video stream.

Kramer KDS-8 Features:

• User configured as encoder or decoder
• Streams up to 4K@60Hz (4:4:4) resolution signals over a 10G network interface providing lossless compression
• Fully standard and compliant SDVoE codec.
• Streaming Support — Multicast, Unicast.
• Powered by the network (PoE)
• Video wall and multiview support
• Managed by KDS-8-MNGR
• HDCP 2.2 Compliant, HDR Support, Genlock and Fastswitch Modes Support

Kramer KDS-8 Specifications:

• Inputs
  • 1 HDMI: On a female HDMI connector
  • 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack
  • Outputs
  • 1 HDMI: On a female HDMI connector
  • 1 IR: On a 3.5mm mini jack. If you want to use the IR extension, it is necessary to order these accessories from Kramer: 3300–500028 PT–5R/T IR receiver cable 2m, 3.5mm mini jack, 3300–500029 PT–5R/T IR emitter cable 2m, and a 3.5mm mini jack
• Ports
  • 1 10GbE Ethernet: On an R–J45 connector
  • 1 Unbalanced Stereo Audio: On a 3.5mm mini jack
  • 1 1GbE Ethernet: On an R–J45 connector
  • 1 RS-232: On a 3–pin terminal block connector
• Video
  • Standards Compliance: 10/12–bit HDR (Point–to–Point and Genlock mode only), HDCP 2.2 &1.4, DVI 1.0,
  • Extension Line
  • Signal Compression: Ultra–light compression, lossless for most content
  • Range: Up to 100m in point–to–point mode
• Audio
  • Standards Compliance: Supports pass–through of audio formats including LPCM 2.0/5.1/7.1, Bitstream and HD Bitstream from HDMI sources. Analog audio supports 20 Hz~20 kHz, 24–bit 48 kHz sampling rates
• Power
  • Source: 12V DC
  • Consumption: 3A
  • PoE Budget: 25W (not including cable loss)
• Environmental Conditions
  • Operating Temperature: 0 to + 45°C (32 to + 113 °F), 10% to 90%, non–condensing
  • Storage Temperature: –20 to +70°C (–4 to + 158 °F), 10% to 90%, non–condensing
  • Humidity: 10% to 90%, non–condensing
• Product Dimensions: 23.10cm x 11.60cm x 2.50cm (9.09" x 4.57" x 0.98" ) W, D, H
• Product Weight: 0.5kg (1.1lbs) approx.
• Shipping Dimensions: 35.10cm x 21.20cm x 7.20cm (13.82" x 8.35" x 2.83" ) W, D, H
• Shipping Weight: 1.2kg (2.6lbs) approx.