The ClearOne CONVERGE® Pro 2 Audio DSP Platform is ideal for conferencing and sound reinforcement applications. This DSP platform is equipped with a full complement of I/O options: four inputs with AEC, eight outputs, built-in VoIP/Skype for Business interface, Telco and USB audio; GPIO, RS232 and IP control interfaces; as well as P-Link and C-Link expansion buses. It is optimized to work with the new Beamforming mic array 2 and DIALOG® 20 two-channel wireless microphone systems through its native connection.

Image shown above is for illustrative purposes only; actual product appearance may vary.

ClearOne 910-3200-008-D Includes:

• (1) 6’ Grounded Power Cord
• (1) 18” RJ-45 To RJ-45 C-Link Cable
• (1) 12’ Telephone Cable
• (1) 6’ Type A to Type B USB Cable
• (2) Pre-installed Rack Ears
• Rack Decor Screw/Washer Kit

ClearOne 910-3200-008-D Features:

• Built-in analog Telco interface
• 4 mic/line inputs
• 8 mic/line outputs
• Built in USB audio
• Flexible control options include Touch Panel Controller, BYOD dialer apps or 3rd party control modules
• Configure an entire system of C-linked DSPs with CONSOLE AI software
• Built-in DARE™ algorithm for dynamic feedback elimination
• Reduced foot-print and power consumption

ClearOne 910-3200-008-D Specifications:

• MIC/LINE INPUTS & OUTPUTS
  • Inputs:
    • Balanced audio inputs
    • 3.81mm Orange color Phoenix/Euroblock type male header
    • Push-on mini-terminal block
  • Outputs:
    • Balanced audio outputs
    • 3.81mm Black color Phoenix/Euroblock type male header
    • Push-on mini-terminal block
  • Frequency Response: 20Hz – 22kHz @ +4dBu, +/- 0.5dBu
  • EIN (Equivalent Input Noise): 20kHz BW, max gain, Rs = 150Ω, -126dBu
  • THD + N (Total Harmonic Distortion + Noise):
    • 20Hz – 22kHz @ +4dBu, line level, 0.006%
    • 20Hz – 22kHz @ -56dBu, mic level, < 0.04%
  • Dynamic Range: 20Hz – 20kHz @ 0dB, > 105dB
  • Crosstalk (Mic/Line): Channel to Channel, stimulus at 20dBu to receptor at -56dBu, 1kHz, < -98dB
  • Input Impedance: Balanced (line to ground), 2.2kΩ, 1%
  • Nominal Input Level: Adjustable -56dB to 0dB, 7dB step coarse gain
  • Maximum Input Level: -65dBu to 20dBu
  • Phantom Power: 48V, Impedance 6.81kΩ
  • Output Impedance: Balanced (line to ground), 95Ω, 1%
  • Output Level: 0dBu (Nominal), 20dBu (Max), -40dBu (Selectable)
• USB AUDIO
  • Port Type: USB-B connector
  • Audio:
    • Digital Audio
    • 2 x 2 bidirectional channels
  • Compatible:
    • USB 2.0
    • USB 3.0
  • Sample Rate: 48kHz
  • Sample Bit Depth: 24-Bit
• TELEPHONE
  • Port Type: RJ11
  • Frequency Response:
    • Mic/Line Input to Telephone Out: 250Hz – 3.4kHz , +/- 2dB, 4dBu
    • Telephone In to Mic/Line Out: 250Hz – 3.4kHz, +/- 2dB, -15dBu
  • THD + N:
    • Mic/Line Input to Telephone Out: < 0.1% @ 4dBu
    • Telephone In to Mic/Line Out: < 0.3% @ -15dBu
  • Dynamic Range:
    • Mic/Line Input to Telephone Out: > 67dBu
    • Telephone In to Mic/Line Out: > 87dBu
  • REN (Ringer Equivalent Number): 0.2
  • Transhybrid Balance: 30dB (1kHz, all AC terminations)
• ETHERNET
  • Port Type: RJ-45, 10/100Mbps Ethernet Network, Auto Negotiation
  • IP address: IPv4 (IPv6 upgradeable through future s/w, f/w upgrade)
• AMPLIFIER OUTPUT
  • Speaker Output Port: Dual binding posts
  • Audio: 2 Channels
  • Output Power: 10W Max, 8Ω load
  • Frequency Response: 20Hz – 22kHz @ +10dBu, +/- 0.5dBu
  • THD + N: 20Hz – 22kHz @ +10dBu, 1W, < 0.3%
  • Dynamic Range: 20Hz – 22kHz @ 20dB, > 102dB, with 20kHz digital low pass filter
  • Crosstalk: Channel to Channel, stimulus at 20dBu, 10W output to receptor 8Ω load, 20Hz – 22kHz, < -70dB
• C-LINK EXPANSION BUS
  • Ports Type: RJ-45 (Cat5e or Cat6)
  • C-Link In & Out: Proprietary Expansion Bus
  • Audio: 64 Expansion channels
  • Cable: Solid core, factory terminated Cat 5e or 6 cable
  • Distance: Up to 150’ (45M)
• P-LINK PERIPHERAL BUS
  • Ports Type: RJ-45 (Cat5e or Cat6)
  • P-Link In & Out: Proprietary Peripheral Bus
  • PoE In:
    • P-Link In Port
    • PoE 802.3af Mode B, Midspan
    • Power on “spare pairs” 4,5 and 7,8
  • Input voltage range: 48V to 56V
  • Audio: Up to 3 Beamforming Microphone Array 2 units + up to 3 DIALOG 20 Wireless Receiver units + Up to 3 USB Expander units + Up to 3 GPIO Expander units
  • Cable: Solid core, factory terminated Cat 5e or 6 cable
  • Distance: Up to 200’ (60M)
  • Long Distance P-Link:
  • Increases P-Link distance from 200 Ft to 650 Ft
  • 650 Ft (200M) maximum cable distance between any two units
  • Cat6, 550 MHz, 23 AWG, solid conductor cable
  • Do not use Copper Clad Aluminum (CCA) cable
  • Available only for BFM2 peripheral units
  • 48V PoE Midspan Mode B power injector for 1 BFM2 unit
  • 56V PoE Midspan Mode B power injector for 3 BFM2 units
• RS232
  • Port Type: DB9 Female
  • Settings:
    • 9600/19200/38400/57600/115200 Baud
    • Serial Echo
    • Flow Contro
  • Support: Serial commands
• GPIO
  • Port Type: 5.08mm Green color Phoenix/Euroblock type male header
  • Support:
    • Control
    • Status
    • Variable Voltage Control
  • Power Pin: 5V DC @ 350mA Power Source
  • Pin 1 to 4:
    • Open Collector Outputs: 40VDC @ 250mA
    • Active Outputs (Source/Sink): 5VDC @25mA
    • Logic Inputs: 40.2kΩ pull up
    • Variable Voltage Control Inputs: 5VDC max
  • Ground Pin: GND
• USB CONTROL
  • Port Type: USB-B connector
  • Location: Front Panel
  • Compatible: USB 2.0, USB 3.0
• LEDs
  • Location: Front Panel
  • Status LED:
    • Off: Unit still initializing
    • Blue - Fast Blinking: Stack Syncing in progress
    • Blue - Slow Blinking: Unit not configured
    • Blue - Solid: Configured unit
    • Red - Fast Blinking: Stack Sync error
  • Locate LED: Blue - Blinking: Unit “Locate” command received
  • Power LED: Blue - Solid: Unit is powered on
• TOUCH SENSOR
  • Sensor Type: Capacitive Touch Button
  • Location: Front Panel
• POWER & THERMAL
  • Port Type: AC Inlet
  • Mains Voltage: 100-240V AC, 50/60Hz
  • Power Consumption: 50 Watts Typical
  • Thermal: 170 BTU/Hr Typical
  • Operating Temperature: 14°F to 104°F (-10°C to 40°C) Ambient Temperature
• DIMENSION & WEIGHT
  • RU size: 1 RU
  • Dimensions (WxDxH):
    • Without rack-ears: 17” x 10.73” x 1.72” (43.2 x 27.3 x 4.4 cm)
    • With rack-ears: 19” x 10.73” x 1.72” (48.3 x 27.3 x 4.4 cm)
  • Unit Weight (Approx.): 9.3 lbs (4.2 kg)
  • Shipping Weight (Approx.): 13.8 lbs (6.3 kg)