Equipped with the powerhouse Ashly AquaControl software™, the mXa-1502 mixing amplifier is an all encompassing solution for multi-zone music distribution, paging, automatic mixing, and more. This 12x4 mixer is enables you to process 12 audio inputs into four different areas. Designed to be powerful and discreet, this single rack space device includes two Ashly-reliable 150-watt amplifiers capable of driving 2,4 and 8-ohm as well as 25, 70 and 100V loads. AquaControl™ provides convenient access from many browser-based device—no additional equipment or apps needed.
Applications
Hospitality
Education
Sports
House of Worship
Includes
- Ashly AquaControl™ Software
- Inputs: Programmable Analog Mic Preamps, Phantom Power On/Off, Gain with Link Group Assign and Polarity switch, Remote Gain, DVCA Gain, Meter with Peak Hold Equalizers, 31-band Graphic — Constant or Proportional Q, 10-band Parametric EQ + HPF / LPF, and Signal Generator
- Delay Dynamics: Compressor, Auto Leveler, Clip (Brick Wall Limiter), Gate, Anti-Feedback (AFC) Mixer 1-4, Matrixing, Automixers, Ducker
- Outputs: 31-band Graphic — Constant or Proportional Q, 10-Band Parametric, FIR Filters, 2/3/4-way Crossover, Ambient Noise Control, Delay, Dynamics (same as Inputs), Signal Generator, Meter with Peak Hold
- Compatibility: Windows® OS 10, Mac® OS 10 and later, Linux Web Browsers, Chrome for Windows®, OS X, iOS, Android®, Safari for OS X, and Edge for Windows®
- Event Scheduler (Calendar), Event Logs, and Reports
Features
- 8-balanced Mic/Line Inputs
- Precision Class A mic preamp design
- 4 Stereo Line Inputs and 4 Outputs
- 2 x 150W Class D Amplifiers with selectable Multi-mode operation (2/4/8 Ohm + 25/70/100V)
- Four convenient front-panel buttons for source/preset select
- Scheduler and RTC (Real-Time Clock) allows user-defined automatic, timed activation of various operations
- Generous integration I/O, including: Network, Serial, GPIO, VC, Standby & Fault (works with the WR-1, WR-1.1, WR-1.5, and WR-2 remotes)
- Compact 1U design reduces rack space requirements
Specifications
- Damping Factor: >250 (8 Ohm load
- Distortion (SMPTE, typical): < 0.5%
- Distortion (THD-N, typical): < 0.5% (8 Ohms, 10dB below rated power, 20Hz–20kHz)
- Channel Separation: –75dB (dB from full output, 1kHz)
- Signal-to-Noise (unweighted): 20Hz-20kHz, Gain@26dB
- Frequency Response: 20Hz-20kHz, ±0.05dB
- Balanced Input Connector: Euroblock 3.5mm
- Input Impedance: 10k Ohms
- Maximum Input Level: +21dBu
- Speaker Output Connector: Euroblock 7.62mm
- Nominal Voltage Input: 100 – 240VAC
- Operating Range: 70 – 270VAC
- Power Supply Type: SMPS with active PFC
- AC Mains Line Cord Connector: Detachable Nema 5-15 for USA
- Control Network: RJ-45 connector, 1GB Ethernet
- AUX Output Connector: Balanced Euroblock 3.5mm
- AUX Output Maximum Level: +21dBu
- Data Connection: Euroblock 3.5mm – Gnd, +18V, Data Out, Data In
- Fault Condition Logic Outputs : Euroblock 3.5mm – fault indicated by loss of 1Hz “heartbeat” pulse signal
- Remote DC Level Control: Euroblock 3.5mm – Gnd, CV, V+ per input
- Amplifier Protection: Shorted output power limiting, over-temperature, DC-output, power-supply fault, mains-fuses & inrush-current limiting
- Cooling: Continuously variable temperature controlled fan
- Unit Dimensions: 19” x 1.75” x 14.54”
- Dimensions: 25.2” x 2.5" x 19.5”
- Weight : 13.0 lbs